Parker Legris Rectus : Distribution Catalogue

Universal Series

The seal wear compensating technology offers reliable and durable sealing, whether under pressure or vacuum.

Technical Characteristics

Component Materials

• Compatible Fluids: Compressed air

Lever fixing screw: zinc-plated steel

Silicone-free

Other fluids: see compatibility chart at the end of this chapter • Working Pressure: Vacuum up to 40 bar, depending on the model • Working Temperature: -20°C to + 80°C up to -40°C with no handle operation Reliable performance is dependent upon the type of fluid conveyed, component materials and tubing being used. Guaranteed for use with a vacuum of 755 mm Hg (99 % vacuum).

Stem: brass

Lever: treated zamak

Stem seal: NBR

Wear-compensation seal: NBR

Seat seal: graphite-impregnated polyamide

Advantages • Automatic seal wear compensation

Locking nut: nickel-plated brass

• Vacuum resistance • Ease of operation • Short, repositionable and exchangeable handles

Ball: nickel-plated polished brass

Body : nickel-plated brass

Regulations • PED • RoHS

• REACH

Installation Options

Lockable Valves

Mountable Valves

Our lockable ball valves have been developed in order to prevent potentially dangerous consequences caused by unintended operation. Lockable in different positions, this range meets inter national safety requirements, such as ISO 4414. The valves are lockable: • at one point: models 0432 and 0439 , open or closed position • at three points: models 0436, 0437 and 0438 , closed position only To stop fluid circulation and vent the circuit, 2 venting systems are provided: • with threaded exhaust, to allow discharge of downstream media • with pin-hole vent, for applications with no special discharge requirement Fluid flow direction is indicated by an arrow on the valve body.

On steel plate: • bulkhead fixing • complete valve below bulkhead

On frame: • assemble with bolts On wooden panel: • assemble with woodscrews

Vented Valves

0400 2/2 In-Line Ball Valve, Male BSPP Thread

0411 2/2 In-Line Ball Valve with Connections for Use with Steel Tubing

Nickel-plated brass, NBR

Nickel-plated brass, NBR

DN C

E F H H1 J L L1 M Kg 7.0 14.0 35.0 29.0 14.0 45.0 25.0 48.0 0.094 9.0 19.0 38.0 31.0 19.0 60.0 36.0 48.0 0.166 11.0 24.0 45.0 43.0 24.0 70.0 43.0 69.0 0.252 12.0 27.0 47.0 44.0 27.0 78.0 45.0 69.0 0.324 12.0 38.0 63.0 54.0 39.0 90.0 50.0 108.0 0.714

DN ØD

F F1 H H1 J L L1 M Kg 14.0 19.0 38.0 31.0 19.0 76.0 30.0 48.0 0.173 17.0 19.0 38.0 31.0 19.0 77.0 30.0 48.0 0.195 19.0 19.0 38.0 31.0 19.0 78.0 31.0 48.0 0.210 22.0 24.0 45.0 43.0 24.0 85.0 36.0 69.0 0.310

4.0 G1/8 0400 04 10 7.0 G1/4 0400 07 13 10.0 G3/8 0400 10 17 13.0 G1/2 0400 13 21 18.0 G3/4 0400 18 27

4.0 6.0 7.0

0411 04 06 0411 06 08 0411 07 10 0411 10 12

6 8

10 12

10.0

Maximum working pressure: 40 bar

Maximum working pressure: 40 bar

444